NR_UNKNOWN_PID (0x0000)
What NACK reason 0x0000, NR_UNKNOWN_PID, means when a fixture sends it, and what to do about it at the bench.
NR_UNKNOWN_PID is NACK reason 0x0000 (0): the reason a fixture gives when it refuses an RDM request this way. RDMBench says it as: the device does not implement this parameter (NR_UNKNOWN_PID).
At the bench
The unit does not have this parameter. The most common refusal and usually harmless: a unit lists what it supports, and anything else should get this answer. It is a fault only for a parameter every responder must answer, and some units say nothing at all instead, which reads as a timeout rather than a refusal.
Numbered in E1.20, Table A-17. Every NACK reason is listed in NACK reasons.