Codes / NACK reasons

NR_HARDWARE_FAULT (0x0002)

What NACK reason 0x0002, NR_HARDWARE_FAULT, means when a fixture sends it, and what to do about it at the bench.

Code
0x0002
Decimal
2
Kind
NACK reason
Version
0.12.0
Runs on
macOS 15 Sequoia or later, Apple silicon or Intel
Needs
An Enttec DMX USB Pro with its DMX/RDM firmware (major version 2), or, on a rig, an Art-Net 4 node with RDM on at its ports
Price
Free

NR_HARDWARE_FAULT is NACK reason 0x0002 (2): the reason a fixture gives when it refuses an RDM request this way. RDMBench says it as: an internal hardware fault stopped the device complying (NR_HARDWARE_FAULT).

At the bench

The unit understood the request, but something inside it kept it from acting. The one refusal about the fixture’s hardware rather than the conversation: read its status messages and sensors, and try the same change from its own panel to see whether that fails too.

Numbered in E1.20, Table A-17. Every NACK reason is listed in NACK reasons.