Codes / NACK reasons

NR_PROXY_REJECT (0x0003)

What NACK reason 0x0003, NR_PROXY_REJECT, means when a fixture sends it, and what to do about it at the bench.

Code
0x0003
Decimal
3
Kind
NACK reason
Version
0.12.0
Runs on
macOS 15 Sequoia or later, Apple silicon or Intel
Needs
An Enttec DMX USB Pro with its DMX/RDM firmware (major version 2), or, on a rig, an Art-Net 4 node with RDM on at its ports
Price
Free

NR_PROXY_REJECT is NACK reason 0x0003 (3): the reason a fixture gives when it refuses an RDM request this way. RDMBench says it as: the proxy in front of the device rejected the request (NR_PROXY_REJECT).

At the bench

Something between the controller and the unit, a node, splitter or proxy that answers RDM for the units behind it, turned the request away, and the unit may never have seen it. Put the unit on a direct line before reading anything into it.

Numbered in E1.20, Table A-17. Every NACK reason is listed in NACK reasons.