NR_DATA_OUT_OF_RANGE (0x0006)
What NACK reason 0x0006, NR_DATA_OUT_OF_RANGE, means when a fixture sends it, and what to do about it at the bench.
NR_DATA_OUT_OF_RANGE is NACK reason 0x0006 (6): the reason a fixture gives when it refuses an RDM request this way. RDMBench says it as: the value is out of range or not supported (NR_DATA_OUT_OF_RANGE).
At the bench
The unit understood the request, but will not take that value: an address past what its footprint leaves, a personality it does not have, a sensor number past its count. Check the value against what the unit itself reports, not the manual, which may be for other firmware.
Numbered in E1.20, Table A-17. Every NACK reason is listed in NACK reasons.