NR_BUFFER_FULL (0x0007)
What NACK reason 0x0007, NR_BUFFER_FULL, means when a fixture sends it, and what to do about it at the bench.
NR_BUFFER_FULL is NACK reason 0x0007 (7): the reason a fixture gives when it refuses an RDM request this way. RDMBench says it as: the device’s buffer or queue has no free space (NR_BUFFER_FULL).
At the bench
The unit’s queue was full and it could not take the request. Usually brief: wait and ask again. If it lasts with nothing else on the line, the unit is not emptying its queue, which is its firmware.
Numbered in E1.20, Table A-17. Every NACK reason is listed in NACK reasons.