# NR_UNKNOWN_UID (0x000E)

> What NACK reason 0x000E, NR_UNKNOWN_UID, means when a fixture sends it, and what to do about it at the bench.

- **Code:** 0x000E
- **Decimal:** 14
- **Kind:** NACK reason
- **Version:** 0.12.0
- **Runs on:** macOS 15 Sequoia or later, Apple silicon or Intel
- **Needs:** An Enttec DMX USB Pro with its DMX/RDM firmware (major version 2), or, on a rig, an Art-Net 4 node with RDM on at its ports
- **Price:** Free

`NR_UNKNOWN_UID` is NACK reason `0x000E` (14): the reason a fixture gives when it refuses an RDM request this way. RDMBench says it as: *the device does not recognize that UID (NR_UNKNOWN_UID)*.

## At the bench

The device does not know the UID the request asked about, usually a gateway or proxy asked about a unit it has not discovered. Run discovery through it again.

Numbered in [E1.20](https://tsp.esta.org/tsp/documents/published_docs.php), Table A-17. Every NACK reason is listed in [NACK reasons](/codes/nack/).
