Codes / Status messages

STS_CAL_FAIL (0x0001)

What status message ID 0x0001, STS_CAL_FAIL, means when a fixture sends it, and what to do about it at the bench.

Code
0x0001
Decimal
1
Kind
Status message ID
Version
0.12.0
Runs on
macOS 15 Sequoia or later, Apple silicon or Intel
Needs
An Enttec DMX USB Pro with its DMX/RDM firmware (major version 2), or, on a rig, an Art-Net 4 node with RDM on at its ports
Price
Free

STS_CAL_FAIL is standard status message ID 0x0001 (1), which a fixture raises about itself. RDMBench shows it in words in the report and the monitor.

At the bench

A moving part, named in the message by its slot (pan, tilt, a wheel), did not finish calibrating at power-up or reset. Look at that part’s motor, belt and home sensor, and anything blocking its travel, and watch it reset.

Numbered in E1.20, Appendix B. Every status message ID is listed in Status messages.