# STS_CAL_FAIL (0x0001)

> What status message ID 0x0001, STS_CAL_FAIL, means when a fixture sends it, and what to do about it at the bench.

- **Code:** 0x0001
- **Decimal:** 1
- **Kind:** Status message ID
- **Version:** 0.12.0
- **Runs on:** macOS 15 Sequoia or later, Apple silicon or Intel
- **Needs:** An Enttec DMX USB Pro with its DMX/RDM firmware (major version 2), or, on a rig, an Art-Net 4 node with RDM on at its ports
- **Price:** Free

`STS_CAL_FAIL` is standard status message ID `0x0001` (1), which a fixture raises about itself. RDMBench shows it in words in the [report](/help/report/#status-messages) and the [monitor](/help/monitor/).

## At the bench

A moving part, named in the message by its slot (pan, tilt, a wheel), did not finish calibrating at power-up or reset. Look at that part's motor, belt and home sensor, and anything blocking its travel, and watch it reset.

Numbered in [E1.20](https://tsp.esta.org/tsp/documents/published_docs.php), Appendix B. Every status message ID is listed in [Status messages](/codes/status/).
