Codes / Status messages

STS_OVERTEMP (0x0021)

What status message ID 0x0021, STS_OVERTEMP, means when a fixture sends it, and what to do about it at the bench.

Code
0x0021
Decimal
33
Kind
Status message ID
Version
0.12.0
Runs on
macOS 15 Sequoia or later, Apple silicon or Intel
Needs
An Enttec DMX USB Pro with its DMX/RDM firmware (major version 2), or, on a rig, an Art-Net 4 node with RDM on at its ports
Price
Free

STS_OVERTEMP is standard status message ID 0x0021 (33), which a fixture raises about itself. RDMBench shows it in words in the report and the monitor.

At the bench

A sensor, numbered in the message, reads above its limit, and the message carries the temperature. Fans, filters and dust first; then the sensor itself, if the reading does not match how warm the unit really is.

Numbered in E1.20, Appendix B. Every status message ID is listed in Status messages.