# STS_OVERTEMP (0x0021)

> What status message ID 0x0021, STS_OVERTEMP, means when a fixture sends it, and what to do about it at the bench.

- **Code:** 0x0021
- **Decimal:** 33
- **Kind:** Status message ID
- **Version:** 0.12.0
- **Runs on:** macOS 15 Sequoia or later, Apple silicon or Intel
- **Needs:** An Enttec DMX USB Pro with its DMX/RDM firmware (major version 2), or, on a rig, an Art-Net 4 node with RDM on at its ports
- **Price:** Free

`STS_OVERTEMP` is standard status message ID `0x0021` (33), which a fixture raises about itself. RDMBench shows it in words in the [report](/help/report/#status-messages) and the [monitor](/help/monitor/).

## At the bench

A sensor, numbered in the message, reads above its limit, and the message carries the temperature. Fans, filters and dust first; then the sensor itself, if the reading does not match how warm the unit really is.

Numbered in [E1.20](https://tsp.esta.org/tsp/documents/published_docs.php), Appendix B. Every status message ID is listed in [Status messages](/codes/status/).
