Codes / Status messages

STS_OVERVOLTAGE_PHASE (0x0031)

What status message ID 0x0031, STS_OVERVOLTAGE_PHASE, means when a fixture sends it, and what to do about it at the bench.

Code
0x0031
Decimal
49
Kind
Status message ID
Version
0.12.0
Runs on
macOS 15 Sequoia or later, Apple silicon or Intel
Needs
An Enttec DMX USB Pro with its DMX/RDM firmware (major version 2), or, on a rig, an Art-Net 4 node with RDM on at its ports
Price
Free

STS_OVERVOLTAGE_PHASE is standard status message ID 0x0031 (49), which a fixture raises about itself. RDMBench shows it in words in the report and the monitor.

At the bench

The supply on the phase the message numbers is above the unit’s limit, and the message carries the voltage. Check the supply before the unit: a wrong voltage setting, or a lost neutral on a three-phase feed.

Numbered in E1.20, Appendix B. Every status message ID is listed in Status messages.