# STS_READY (0x0050)

> What status message ID 0x0050, STS_READY, means when a fixture sends it, and what to do about it at the bench.

- **Code:** 0x0050
- **Decimal:** 80
- **Kind:** Status message ID
- **Version:** 0.12.0
- **Runs on:** macOS 15 Sequoia or later, Apple silicon or Intel
- **Needs:** An Enttec DMX USB Pro with its DMX/RDM firmware (major version 2), or, on a rig, an Art-Net 4 node with RDM on at its ports
- **Price:** Free

`STS_READY` is standard status message ID `0x0050` (80), which a fixture raises about itself. RDMBench shows it in words in the [report](/help/report/#status-messages) and the [monitor](/help/monitor/).

## At the bench

The part the message names is ready. A reading, not a fault: it usually follows a not-ready message once that part has warmed up or calibrated.

Numbered in [E1.20](https://tsp.esta.org/tsp/documents/published_docs.php), Appendix B. Every status message ID is listed in [Status messages](/codes/status/).
