Codes / Status messages

STS_EEPROM_ERROR (0x0060)

What status message ID 0x0060, STS_EEPROM_ERROR, means when a fixture sends it, and what to do about it at the bench.

Code
0x0060
Decimal
96
Kind
Status message ID
Version
0.12.0
Runs on
macOS 15 Sequoia or later, Apple silicon or Intel
Needs
An Enttec DMX USB Pro with its DMX/RDM firmware (major version 2), or, on a rig, an Art-Net 4 node with RDM on at its ports
Price
Free

STS_EEPROM_ERROR is standard status message ID 0x0060 (96), which a fixture raises about itself. RDMBench shows it in words in the report and the monitor.

At the bench

The unit’s settings memory failed a check. Settings may not survive a power cycle, or may have gone back to defaults. A factory reset or a firmware reload sometimes clears it; if it returns, it is the board.

Numbered in E1.20, Appendix B. Every status message ID is listed in Status messages.