# STS_EEPROM_ERROR (0x0060)

> What status message ID 0x0060, STS_EEPROM_ERROR, means when a fixture sends it, and what to do about it at the bench.

- **Code:** 0x0060
- **Decimal:** 96
- **Kind:** Status message ID
- **Version:** 0.12.0
- **Runs on:** macOS 15 Sequoia or later, Apple silicon or Intel
- **Needs:** An Enttec DMX USB Pro with its DMX/RDM firmware (major version 2), or, on a rig, an Art-Net 4 node with RDM on at its ports
- **Price:** Free

`STS_EEPROM_ERROR` is standard status message ID `0x0060` (96), which a fixture raises about itself. RDMBench shows it in words in the [report](/help/report/#status-messages) and the [monitor](/help/monitor/).

## At the bench

The unit's settings memory failed a check. Settings may not survive a power cycle, or may have gone back to defaults. A factory reset or a firmware reload sometimes clears it; if it returns, it is the board.

Numbered in [E1.20](https://tsp.esta.org/tsp/documents/published_docs.php), Appendix B. Every status message ID is listed in [Status messages](/codes/status/).
