Questions

Who builds RDMBench, whether it stays free, what it cannot read, which fixtures it has met, Windows and Linux, and where a problem goes, answered by the person who makes it.

Version
0.12.0
Runs on
macOS 15 Sequoia or later, Apple silicon or Intel
Needs
An Enttec DMX USB Pro with its DMX/RDM firmware (major version 2), or, on a rig, an Art-Net 4 node with RDM on at its ports
Price
Free

Who builds it?

I do: Darin Pope. RDMBench is a one-person project, and PlanetPope, Inc. publishes it. It has been run at a real bench since September 2026, on an Enttec DMX USB Pro, and every version is on Releases. About says what has been proven on real fixtures and what only on the simulator.

Will it stay free?

That’s a loaded question. Free, all of it: there is no Pro tier, no licence key, and nothing held back from any build. What I plan to sell is work, not software: onboarding a shop’s fixture models into the public library, and priority support as a yearly subscription. Neither is offered yet (Services). I chose it this way because it is low hassle for everyone, me included, and the paid work and the free app pull the same way: what onboarding finds goes into the library every bench uses. Also, if I ever decide to sell RDMBench to someone, I can’t guarantee what that new owner would do.

What can’t it read?

Anything the fixture does not report. RDMBench reads a fixture over RDM, so it knows what the fixture says about itself and nothing else. A unit that reports no sensors gives the report less to go on, and a belt, a lens or an emitter it has no sensor for is invisible to it. The report does not hide the gaps: anything the fixture did not answer is listed under Problems during read, and the behavior check says how far to trust what it did answer. When nothing it reports explains the complaint, the report says that too, and where to look instead (Troubleshooting).

Which fixtures has it met?

The ones in the fixture library, each with what it gets wrong and how that was found. The first was an ADJ 5PX HEX, which answered on the first try and then turned out to break the RDM standard in six ways, among them an identify that works backwards. A SHEHDS GlamoPar07A reports a manufacturer ID registered to no one, under the name of a different company, Canara, whose registered ID is another. The rest of what it has been run against is the built-in simulator, which About lists area by area.

Windows or Linux?

Windows and Linux are planned and not started. It runs on macOS 15 Sequoia or later, Apple silicon or Intel (Requirements).

Where does a problem go?

A security problem goes to Security, which says what to send and what happens next. Anything else, a wrong reading, a fixture it trips over, a report that says something it should not, goes to darin@rdmbench.com. Say which fixture, its firmware, and what the report said, and attach the report if you can.