Martin Professional A/S

What the rdmbench-pids fixture library holds for Martin Professional A/S, whose ESTA manufacturer ID is 0x4D50: the models profiled from a unit on a bench, and the names of the parameters the maker added to RDM.

For Martin fixtures, Martin Companion knows Martin’s status codes, private parameters and spares better than any cross-brand tool. Use it, and use RDMBench for everything else on the bench (see Why).

Models

No Martin Professional A/S model is profiled yet. RDMBench captures one from a unit on the bench with Fixture → Contribute Fixture Profile… (see The PID library).

Manufacturer parameters

The 37 parameters Martin Professional A/S fixtures may list in SUPPORTED_PARAMETERS without describing, named as tables/martin-professional.json names them. A fixture that describes a parameter itself always wins over this table: makers reuse numbers across product generations, and only the fixture knows which generation it is.

Source: MAC Viper XIP User Manual Revision G, chapter ‘RDM functions’ (https://www.martin.com/en-US/site_elements/martin-manuals-mac-viper-xip-user-safety-and-installation-manual). Names verbatim; settable from the table’s GET/SET columns. The manual gives no data types. The MAC Viper Performance User Guide Rev C and MAC Viper Profile User Guide Rev D (2012) print no PID table — they say to ask the fixture through SUPPORTED_PARAMETERS / PARAMETER_DESCRIPTION — so which of these a Viper Performance implements is unconfirmed.