# RDMBench 0.6.0

> RDMBench 0.6.0, released 2026-10-24 for macOS: each build's file, size and SHA-256.

- **Version:** 0.6.0
- **Released:** 2026-10-24
- **Platforms:** macOS

A version is listed here only once every platform RDMBench is built
for has it, so these are all of this version's builds.

A newer release is out: [RDMBench 0.12.0](/releases/0.12.0/).
The app offers it as an update. This version's files stay where they
are, for a bench that needs it.

## What's new

- **Change Address and Mode…** sets a unit's start address and
  personality from its report, the Fixture menu or the sidebar. The
  address is checked against the chosen mode's footprint before
  anything is sent, each change is read back, and a unit that refuses
  because it is locked is said as locked.
- **Sweep Modes…** runs the same check — the report, a load, or a
  channel walk by eye — in each personality you pick, shows the modes
  side by side with what differs between them, then puts the unit's
  own mode and address back. If RDMBench quits partway, the next launch
  offers to put the unit back.
- **The app reaches an Art-Net node**, and asks macOS for Local Network
  access to do it. When a node's ports give nothing, it says why: RDM
  turned off at a port, or a node that never runs discovery. It no
  longer tells you to check the cable.
- **DMX through an Art-Net node**: Send DMX, the load test, the channel
  walk and a sweep's lit checks now work on a rig, but only on a port
  nothing else is driving. Output ends the moment another source joins,
  and every hold ends with a frame at zero, since a node repeats its
  last frame.
- **Identify is off when the app connects**, on every unit, as each
  model means it.
- **A unit whose two footprints disagree** is placed by the smaller.
  The ADJ 5PX reports 12 channels in every mode, while its 6-channel
  mode describes itself as six; the load test, the sidebar, Send DMX
  and Change Address and Mode now use six, and the report says which
  it used.
- **The monitor keeps each unit's reply times** — fastest, typical,
  slowest — for the session, while dark and during each load hold, so a
  unit that slows as it warms shows before it starts missing answers.
- **A widget's line is listed in patch order**, as a rig's universe is,
  and the identify walk follows the sidebar.
- **Done waits for the re-read.** After a change of address or mode, a
  sweep, Finish Repair or Match Other Units, the sheet stays open with
  its spinner until the report shows what the change made.
- **Assistants on other computers**: a wrong password now waits longer
  after each of five misses, the load tool always names the unit it
  will drive, and an assistant can no longer reach a load without the
  question to you.
- On the command line, `behaviour --fail-on-findings` gives a script an
  exit status to read, and `set-label` prints the label as text again.

## Requirements

The manifest does not record what an older build needs. The newest
release's requirements are on [Requirements](/requirements/).

## macOS

- **Build:** 20261024.2031
- **File:** [RDMBench-0.6.0-20261024.2031.dmg](https://updates.rdmbench.com/RDMBench-0.6.0-20261024.2031.dmg), 50,833,295 bytes
- **SHA-256:** `fadc054cb77491f9eca9090f80e69710f4dc8eb1af69b8decd12bdde0cbac6da`

To check a download on a Mac: `shasum -a 256 RDMBench-0.6.0-20261024.2031.dmg` prints
the SHA-256 above.
