Releases

RDMBench 0.9.0

RDMBench 0.9.0, released 2026-11-02 for macOS: each build's file, size and SHA-256.

Version
0.9.0
Released
2026-11-02
Platforms
macOS

A version is listed here only once every platform RDMBench is built for has it, so these are all of this version’s builds.

A newer release is out: RDMBench 0.12.0. The app offers it as an update. This version’s files stay where they are, for a bench that needs it.

What’s new

  • A line’s addresses and modes in one grid. Fixture → Change Addresses and Modes on Line… opens a window with a row for each chosen unit, and the universe drawn twice above it, Current and Proposed, laid out as a desk shows a patch. Type an address or pick a mode, or drag a unit on the Proposed map, and every change is checked against the rest of the line before anything is sent. Changing a mode moves the units after it, units of one model in one mode can share an address as a stack, and Put Them Back undoes the plan until you disconnect. From the command line, rdmbench-cli set-line --plan FILE takes the same plan as a CSV, and --dry-run shows what it would change.
  • The whole rig in one sheet, with its sensors. Fixture → Read Every Unit for Rig Sheet… reads every unit on every universe and opens the rig sheet, now with each unit’s serial and its sensors. Beside it is a sensor sheet, one row per reading, for putting units of one model side by side. Save… writes both.
  • The serial number, when the unit keeps it in its maker’s own parameter. A MAC Aura has no standard serial number. RDMBench now reads it from the parameter the PID library names for it, shows it under the unit in the sidebar and in Device details, and puts it first on the repair sheet. A unit that answers with nothing stored is said to have a blank serial.
  • Hours that were reset are said that way. Where a model keeps its lifetime hours and power cycles in sensors of its own, as the MAC Aura does, the report shows the lifetime figure beside the counter and says when the counter was reset. One Aura read 5 hours against a lifetime of 10,041.
  • A MAC Aura in Extended mode takes 25 channels. Its DEVICE_INFO says 14, and address checks, the line grid and a load now go by the mode’s own 25.
  • A sensor whose own description cannot be true is shown raw. When a unit describes a sensor in a way that contradicts itself, the report shows the number it sent, with no unit or limits, and does not rate it OK.
  • The repair sheet says what it could not rate: sensors shown raw, sensors that gave no reading, and status messages the unit never gave. When nothing was found, it says that in so many words. Its complaint now counts an error seen in any report of the repair, and says how often it was seen and whether it was gone by the last.
  • The wire log, Compare with Previous Visit and the rig sheet open in windows of their own, so they can be read beside the report. The wire log follows the line as it goes.
  • Bigger text. View → Bigger (⌘+), View → Smaller (⌘-) and View → Actual Size (⌘0) set the size of the text in every window, and RDMBench keeps it.
  • VoiceOver reads the app. Ratings are read as words and shown as shapes under Differentiate without color, and the warning and error colors have more contrast, so they can be read as text.
  • Discovery is quicker on a line of one maker’s units. Fifteen MAC units took most of a minute to find; the bench now waits 50 ms, not 250 ms, on a range nobody answers.
  • Choose which units RDMBench talks to. On a widget’s line every unit starts chosen, and on an Art-Net universe none do. A unit you leave alone is dimmed and marked Left alone, keeps its last report with its time, and is never read, scanned or watched until you choose it again. Leave Alone and Choose are on each row and in the Fixture menu.
  • Help → Report a Problem… saves one .zip on your Desktop with RDMBench’s own logs, the last error it showed you and the packets of your last connection, with passwords, cookies and tokens hidden. Send it to darin@rdmbench.com. If something inside RDMBench went wrong that it could not handle, it says so the next time it opens.
  • A unit that calls itself something else says so. When the model file that matched it names a different maker or model, the report’s header shows the file’s name beside the unit’s own, and says when the unit’s manufacturer ID is registered to nobody.
  • A unit that never answers for its status messages is said that way, not as “None reported”. A unit that ignores them has no way to report a fault, which is not the same as having none.
  • Setting a label on a unit known to drop it says so before sending, and reads the timeout as the model, not the cable.
  • Identify means lit, everywhere. Turning identify on lights the unit even on models known to invert it, in every place that sends it.
  • The desk match and the GDTF Share shortlist use the footprint the unit’s mode actually places, not the one DEVICE_INFO may have left behind.
  • Interrupted Work names the program that quit: RDMBench, the command line, or an assistant’s server.
  • The wire log says which universe it shows when you are on a rig, and its export is named for it.
  • The monitor says 1 poll, not 1 polls.
  • About RDMBench now says where problems and security reports go: darin@rdmbench.com.

Requirements

The manifest does not record what an older build needs. The newest release’s requirements are on Requirements.

macOS

To check a download on a Mac: shasum -a 256 RDMBench-0.9.0-20261102.2214.dmg prints the SHA-256 above.