# RDMBench 0.9.0

> RDMBench 0.9.0, released 2026-11-02 for macOS: each build's file, size and SHA-256.

- **Version:** 0.9.0
- **Released:** 2026-11-02
- **Platforms:** macOS

A version is listed here only once every platform RDMBench is built
for has it, so these are all of this version's builds.

A newer release is out: [RDMBench 0.12.0](/releases/0.12.0/).
The app offers it as an update. This version's files stay where they
are, for a bench that needs it.

## What's new

- **A line's addresses and modes in one grid.** **Fixture → Change
  Addresses and Modes on Line…** opens a window with a row for each
  chosen unit, and the universe drawn twice above it, Current and
  Proposed, laid out as a desk shows a patch. Type an address or pick
  a mode, or drag a unit on the Proposed map, and every change is
  checked against the rest of the line before anything is sent.
  Changing a mode moves the units after it, units of one model in one
  mode can share an address as a stack, and **Put Them Back** undoes
  the plan until you disconnect. From the command line, `rdmbench-cli
  set-line --plan FILE` takes the same plan as a CSV, and `--dry-run`
  shows what it would change.
- **The whole rig in one sheet, with its sensors.** **Fixture → Read
  Every Unit for Rig Sheet…** reads every unit on every universe and
  opens the rig sheet, now with each unit's serial and its sensors.
  Beside it is a sensor sheet, one row per reading, for putting units
  of one model side by side. **Save…** writes both.
- **The serial number, when the unit keeps it in its maker's own
  parameter.** A MAC Aura has no standard serial number. RDMBench now
  reads it from the parameter the PID library names for it, shows it
  under the unit in the sidebar and in Device details, and puts it
  first on the repair sheet. A unit that answers with nothing stored
  is said to have a blank serial.
- **Hours that were reset are said that way.** Where a model keeps
  its lifetime hours and power cycles in sensors of its own, as the
  MAC Aura does, the report shows the lifetime figure beside the
  counter and says when the counter was reset. One Aura read 5 hours
  against a lifetime of 10,041.
- **A MAC Aura in Extended mode takes 25 channels.** Its DEVICE_INFO
  says 14, and address checks, the line grid and a load now go by the
  mode's own 25.
- **A sensor whose own description cannot be true is shown raw.**
  When a unit describes a sensor in a way that contradicts itself, the
  report shows the number it sent, with no unit or limits, and does not
  rate it OK.
- **The repair sheet says what it could not rate**: sensors shown raw,
  sensors that gave no reading, and status messages the unit never
  gave. When nothing was found, it says that in so many words. Its
  complaint now counts an error seen in any report of the repair, and
  says how often it was seen and whether it was gone by the last.
- **The wire log, Compare with Previous Visit and the rig sheet open
  in windows of their own**, so they can be read beside the report.
  The wire log follows the line as it goes.
- **Bigger text.** **View → Bigger** (⌘+), **View → Smaller** (⌘-) and
  **View → Actual Size** (⌘0) set the size of the text in every
  window, and RDMBench keeps it.
- **VoiceOver reads the app.** Ratings are read as words and shown as
  shapes under *Differentiate without color*, and the warning and
  error colors have more contrast, so they can be read as text.
- **Discovery is quicker on a line of one maker's units.** Fifteen MAC
  units took most of a minute to find; the bench now waits 50 ms, not
  250 ms, on a range nobody answers.
- **Choose which units RDMBench talks to.** On a widget's line every
  unit starts chosen, and on an Art-Net universe none do. A unit you
  leave alone is dimmed and marked *Left alone*, keeps its last report
  with its time, and is never read, scanned or watched until you choose
  it again. Leave Alone and Choose are on each row and in the Fixture
  menu.
- **Help → Report a Problem…** saves one `.zip` on your Desktop with
  RDMBench's own logs, the last error it showed you and the packets of
  your last connection, with passwords, cookies and tokens hidden. Send
  it to darin@rdmbench.com. If something inside RDMBench went wrong
  that it could not handle, it says so the next time it opens.
- **A unit that calls itself something else says so.** When the model
  file that matched it names a different maker or model, the report's
  header shows the file's name beside the unit's own, and says when the
  unit's manufacturer ID is registered to nobody.
- **A unit that never answers for its status messages is said that
  way**, not as "None reported". A unit that ignores them has no way to
  report a fault, which is not the same as having none.
- **Setting a label on a unit known to drop it** says so before
  sending, and reads the timeout as the model, not the cable.
- **Identify means lit, everywhere.** Turning identify on lights the
  unit even on models known to invert it, in every place that sends it.
- **The desk match and the GDTF Share shortlist** use the footprint the
  unit's mode actually places, not the one DEVICE_INFO may have left
  behind.
- **Interrupted Work** names the program that quit: RDMBench, the
  command line, or an assistant's server.
- **The wire log** says which universe it shows when you are on a rig,
  and its export is named for it.
- The monitor says *1 poll*, not *1 polls*.
- About RDMBench now says where problems and security reports go:
  darin@rdmbench.com.

## Requirements

The manifest does not record what an older build needs. The newest
release's requirements are on [Requirements](/requirements/).

## macOS

- **Build:** 20261102.2214
- **File:** [RDMBench-0.9.0-20261102.2214.dmg](https://updates.rdmbench.com/RDMBench-0.9.0-20261102.2214.dmg), 54,867,181 bytes
- **SHA-256:** `1e4ccb6092e3f282ad5be3d0523c77359f7fed66976deef468995cde34688493`

To check a download on a Mac: `shasum -a 256 RDMBench-0.9.0-20261102.2214.dmg` prints
the SHA-256 above.
